Skip to product information
USM | USM Haller Kitchen Island D1000A – Pure White, Open Top

USM | USM Haller Kitchen Island D1000 | Cooking

by USM

Price shown excludes UK VAT.

$10,303.00
Colour
Countertop

Production Time
6-8 weeks

Dimensions
No countertop: W302.3 x D102.3 x H89.3cm
Quartz countertop: W302.3 x D102.3 x H91.3cm
Overall dimensions, including feet and handles.

A note on the feet
The sizes above are measured across the frame. These pieces are supplied with USM’s standard adjustable Ø 36 mm glide, which sits slightly proud of the frame at each corner. If your kitchen needs to fit a space precisely, ask us about the narrower Ø 23 mm glide.

Material
Panels: Metal, powder coated
Structure: Steel, chrome plated
Ball: Brass, chrome plated

Specification
Space for an induction hob (not included).

Open on both sides
Every piece is an island, finished on all four sides with storage accessible from either side. One side is for cooking, the other faces the room. No wall is needed behind it. And when you move, it comes with you.

Countertop
– Quartz — price on request — 20 mm engineered quartz, precision-cut and finished to size by our stone specialists. The top is quoted separately, depending on your chosen finish and cut-outs.

– No countertop — the USM frame on its own, ready for a top you source and fit yourself. USM countertop supports are already fitted, ready to carry a heavy stone or timber top.

We can supply and fit the quartz countertop in London and the surrounding area. Elsewhere, please contact us before ordering.

Induction hob
The hob is not included and must be purchased separately. We can cut the quartz countertop to fit your chosen model. Please send us the model details or template drawing when ordering.

A metal countertop is not available on configurations with an induction hob.

A cable channel is built into the frame, keeping the hob’s cable neatly concealed.

Professional installation of the hob is required.

Delivery and installation
Delivery and on-site assembly are included. Electrical and plumbing work are not.

Designed around your space
Every configuration is designed with everyday use in mind, with drawers, doors and shelves placed where a kitchen needs them.

Nothing is fixed. Add more drawers, fewer doors or change the width. USM Haller is a modular system, and we can redraw it around your room.

Changing the configuration also changes the price. A simpler arrangement can cost considerably less than the piece shown here.

Tell us what you have in mind and what you would like to spend, and we will work to it.

Send a photograph of your room to info@archicomma.com and we will design one with you. Archicomma is run by an interior design studio, so your kitchen is designed by us, not selected from a catalogue.

Shipping & Returns

Made to order — about 6–8 weeks

This piece is produced to order by the maker. Production usually takes about 6–8 weeks, after which we despatch it from London.

Because it is built for you, cancellation is limited once production has started on a configuration you specified. Please check the timing before you order — and ask us if the date matters.


Story

USM Haller

In the 1960s the Swiss manufacturer USM asked the architect Fritz Haller to design a building for its own works. What came out of that job was not a building but a way of putting one together — and then, with Paul Schärer, the same logic applied to furniture.

Haller's brief to himself was clear: make furniture that can grow, change and adapt alongside the lives of the people using it. Rather than designing individual pieces he drew a language of components — a chrome-plated steel tube, a brass ball joint, a powder-coated panel — that could be combined in almost any configuration.

That is why one system can furnish a student's room, a corporate office and a family home without changing anything but the count of parts. Sixty years on it has not been redesigned. The ball, the tube and the panel are the same ones.

Left, the same system as an orange bedside unit. Right, as a wall of storage and a desk in a study. Nothing changed but the count of parts.

Designer

Fritz Haller & Paul Schärer

Designed by Fritz Haller & Paul Schärer

Swiss · USM Haller, 1963

Paul Schärer Jr. joined USM in 1961 as an engineer, the third generation of his family to lead the company. He had studied engineering at the Swiss Federal Institute of Technology in Zurich, and he commissioned the architect Fritz Haller to design a new factory and office pavilion — a steel modular system flexible enough to absorb changes in how the company manufactured.

From 1962 the two extended that thinking to the furniture. Rather than designing individual pieces they developed a system of steel modules that could be reconfigured for needs that had not arrived yet. The part that made it work was an elegant ball connector, patented in 1965.

The system was built for USM's own offices first. Series production began in 1969 with an order for 600 workstations for the Rothschild bank in Paris, and USM Haller has stayed in production, unchanged in principle, ever since.


Brand

About USM

A Swiss family firm since 1885, USM builds the modular Haller system: steel, glass and chrome, endlessly reconfigurable.

The company began in 1885 as a metalworking shop in Münsingen, near Bern. In 1961 Paul Schärer Jr. asked the architect Fritz Haller to design a new factory; a furniture system followed, and its ball connector was patented in 1965.

Series production started in 1969 with an order of 600 workstations for a Paris bank. The system is still made in Münsingen by the same family, and has been in the permanent collection of New York's MoMA since 2001.